High-rise structure construction presents a specific set of difficulties that need for specialist tools and methods to solve. The formwork system, which supports concrete while it is being poured and allowed to cure, is one of the most important components of high-rise construction. A creative answer to the unique requirements of high-rise construction, Lianggong Hydraulic Auto-Climbing Formwork offers a safe, effective, and economical way to create tall structures.
Lianggong Hydraulic Auto-Climbing Formwork is a self-climbing formwork system that is mounted on walls and is driven by a hydraulic jacking system of its own. A hydraulic cylinder, an upper and lower commutator, and a bracket are all part of the hydraulic system, which regulates the ascending of the guide rail. The climbing rail and main bracket can ascend independently or jointly thanks to the power provided by the hydraulic system. The use of hydraulic auto-climbing formwork eliminates the need for additional lifting equipment, such as cranes, during construction. The hydraulic auto-climbing formwork is characterized by its high safety factor, quick climbing speed, and ease of handling. It can climb sideways or straight. For the construction of bridges and tall buildings, it is the preferred option.
Hydraulic auto-climbing formwork may ascend both individually and as a full unit. Climbing is a safe, synchronized, and steady process.
In order to conserve site space and prevent damage to the formwork, particularly to the panel, the brackets of the auto-climbing formwork system will not be disassembled until the construction phase is complete.
It offers all-purpose operating systems. Because operating platforms don't need to be reinstalled, the contractors save money on labor and materials while also increasing safety.
The construction mistake of the structure is minimal. The construction fault can be removed floor by floor because the corrective process is straightforward.
The rate of ascent is rapid. It can expedite the entire construction process, which typically takes five days for a single floor.
The tower crane will be used much less because the formwork can rise on its own and the cleaning may be done on-site.
Enhanced efficiency: Lianggong Hydraulic Auto-Climbing Formwork is a very effective method that makes it possible to build high-rise structures quickly. In just a few hours, the system may be put together on-site and raised to the next level, cutting down on the amount of time needed for formwork installation and removal.
Enhanced safety: The technology is made to give construction workers a secure workplace. By doing away with the necessity for human work, the self-climbing feature lowers the possibility of mishaps and injuries. To protect workers, the system is also outfitted with safety features including guardrails and safety nets.An affordable option for building high-rises is Lianggong Auto-Climbing Formwork. Multiple reuses of the system eliminate the requirement for fresh formwork for every construction level. Additionally, the technique increases productivity, cutting down on building time and personnel expenses.
Customizable: The system can be tailored to meet each building's unique requirements. The panels offer a customized solution for every project since they can be resized to match the building's dimensions.
To sum up, Lianggong Hydraulic Auto-Climbing Formwork is revolutionary in the field of high-rise construction, offering a secure, effective, and economical way to create tall structures. The system is a perfect fit for a variety of building constructions because of its self-climbing capability and panels that may be customized. Lianggong Hydraulic Auto-Climbing Formwork will surely have a big impact on how construction develops in the future as the need for high-rise structures keeps increasing.
The construction of high-rise buildings is a complex and challenging process that requires advanced technology and expertise. Among the many critical components of high-rise construction, the formwork system is one of the most important. Lianggong Hydraulic Auto-Climbing Formwork System is a revolutionary solution that addresses the unique needs of high-rise construction, providing a safe, efficient, and cost-effective method for building tall structures.
Lianggong Hydraulic Auto-Climbing Formwork System is a self-climbing modular formwork system designed specifically for high-rise buildings. The system consists of vertical and horizontal panels, connected by steel walers and tie rods, which are assembled on-site and lifted to the next level using hydraulic jacks. The system is anchored to the building structure and can climb automatically, eliminating the need for manual labor and reducing the risk of accidents.
The panels are made of high-strength steel and can be customized to fit the specific shape and size of the building. The system is designed to accommodate various types of building structures, including shear walls, core walls, and frame structures. The system is also equipped with safety features, including guardrails and safety nets, to ensure the safety of workers.
(1) Hydraulic auto-climbing formwork can climb as a complete set or individually. The climbing process is steady, synchronous and safe.
(2) The brackets of the auto-climbing formwork system will not be dismantled until the construction period is finished, thus saving space for the site and avoiding damage to the formwork, especially to the panel.
(3) It provides all-round operating platforms. The contractors do not need to reinstall operating platforms, thus saving the cost on material and labor, and improving safety.
(4) The error of structure construction is small. As work on correction is simple, the construction error can be eliminated floor by floor.
(5) The climbing speed is fast. It can speed up the whole construction work (usually 5 days for one floor).
(6) The formwork can climb by itself and the cleaning work can be done in situ, thus the use of the tower crane will be greatly reduced.
Core Wall Formwork: This type of Lianggong Hydraulic Auto-Climbing Formwork is designed for the construction of core walls in high-rise buildings. The system is anchored to the core wall and can climb automatically, eliminating the need for manual labor and reducing the risk of accidents.
Shear Wall Formwork: Shear wall formwork is another type of Lianggong Hydraulic Auto-Climbing Formwork that is suitable for the construction of shear walls. The system is anchored to the building structure and can climb automatically, reducing the time required for formwork installation and removal. The panels are also customizable to fit the specific shape and size of the building.
Frame Structure Formwork: This type of Lianggong Hydraulic Auto-Climbing Formwork is designed for the construction of frame structures such as columns and beams. The system is anchored to the building structure and can climb automatically, providing a safe and efficient method for constructing frame structures. The panels are also customizable and can be adjusted to fit the unique needs of each project.
Lift Shaft Formwork: Lift shaft formwork is another type of Lianggong Hydraulic Auto-Climbing Formwork that is designed for the construction of lift shafts in high-rise buildings. The system is anchored to the building structure and can climb automatically, providing a safe and efficient method for constructing lift shafts. The panels are also customizable to fit the specific shape and size of the lift shaft.
Lianggong Hydraulic Auto-Climbing Formwork has been used in the construction of numerous high-rise buildings around the world. Here are a few examples:
Ping An Finance Center, Shenzhen, China: This 115-story skyscraper is the fourth tallest building in the world, standing at 599 meters tall. Lianggong Hydraulic Auto-Climbing Formwork was used in the construction of the tower's concrete core.
Lotte World Tower, Seoul, South Korea: This 123-story tower is the fifth tallest building in the world, standing at 555 meters tall. Lianggong Hydraulic Auto-Climbing Formwork was used in the construction of the tower's concrete core.
Mercury City Tower, Moscow, Russia: This 75-story skyscraper is the tallest building in Europe, standing at 338 meters tall. Lianggong Hydraulic Auto-Climbing Formwork was used in the construction of the tower's concrete core.
Lakhta Center, St. Petersburg, Russia: This 87-story skyscraper is the tallest building in Europe, standing at 462 meters tall. Lianggong Hydraulic Auto-Climbing Formwork was used in the construction of the tower's concrete core.
One Vanderbilt, New York City, United States: This 67-story skyscraper is the fourth tallest building in New York City, standing at 427 meters tall. Lianggong Hydraulic Auto-Climbing Formwork was used in the construction of the tower's concrete core.
These are just a few examples of high-rise buildings that have used Lianggong Auto-Climbing Formwork. The system has been used in countless other projects, including residential towers, office buildings, hotels, and has proven to be a reliable and efficient solution for high-rise construction.
English
